Modify the carpentry templates with the disc sander

Wood carpentry videos in Spanish

All my videos of woodwork in Spanish ordered by themes. And also some DIY. They are all the videos of my channel of carpentry of wood in Spanish Enredando No Garaxe, in Youtube. Most have an entry in this blog with photos and more explanations. In addition, you also have a search engine to easily find the video you are looking for. And if you like my woodworking videos, thanks for stopping by my channel and subscribing 🙂

Let's see how I put the tongue and groove wood false ceiling on the garage ceiling. This garage has a roof supported by reinforced concrete beams, so I needed a simple solution. In the end I decided to use super strong contact glue, the kind that they say sticks almost everything with great force, to glue some wooden slats to the bottom of the concrete beams. So it was very easy to put a false ceiling made of tongue and groove wood frieze screwed against those wooden slats. A very clean way to work without having to do construction or drill holes in the concrete beams. We also see the simple thermal insulation that I put in and some tricks to paint the wooden slats of the frieze and step by step how to glue the slats to the beams with the mounting glue. The result is a beautiful continuous ceiling, a light and highly decorative ceiling that, as we can see in the video, is easily removable (at least the wooden slats). In addition, thanks to the fact that I installed the slats in several groups, this ceiling is a false ceiling that can be accessed by simply removing a few screws. It may be an idea for the rehabilitation of a home, but find out the best ways to put thermal insulation and remember that it is always better to have the advice of an architecture studio. ----- 😃 If you wonder what type of mounting adhesive I used, here is a link to the one I used: This I think is the one I used (I didn't keep the bottle and I can't remember it well): https: / /geni.us/fischer-extreme-tack-1 -Amazon And I also used this one: https://geni.us/patex-PL600-1 -Amazon As an Amazon Affiliate, I earn income for the attached purchases that meet the applicable requirements. ----- The parts of this video: 01:03 How to glue wood to reinforced concrete beams 03:09 Strength test of the mounting adhesive 03:21 How to paint the wooden frieze 03:55 How to put a false ceiling ceiling tongue and groove wood https: //enredandonogaraxe.club/

Let's see how I put the tongue and groove wood false ceiling on the garage ceiling. This garage has a roof supported by reinforced concrete beams, so I needed a simple solution. In the end I decided to use super strong contact glue, the kind that they say sticks almost everything with great force, to glue some wooden slats to the bottom of the concrete beams. So it was very easy to put a false ceiling made of tongue and groove wood frieze screwed against those wooden slats. A very clean way to work without having to do construction or drill holes in the concrete beams.

We also see the simple thermal insulation that I put in and some tricks to paint the wooden slats of the frieze and step by step how to glue the slats to the beams with the mounting glue.

The result is a beautiful continuous ceiling, a light and highly decorative ceiling that, as we can see in the video, is easily removable (at least the wooden slats). In addition, thanks to the fact that I installed the slats in several groups, this ceiling is a false ceiling that can be accessed by simply removing a few screws.

It may be an idea for the rehabilitation of a home, but find out the best ways to put thermal insulation and remember that it is always better to have the advice of an architecture studio.
-----
😃 If you wonder what type of mounting adhesive I used, here is a link to the one I used:
This I think is the one I used (I didn't save the boat and I can't remember it well):
https://geni.us/fischer-extreme-tack-1 -Amazon

And I also used this:
https://geni.us/patex-PL600-1 -Amazon

As an Amazon Affiliate, I earn income from attached purchases that meet the applicable requirements.
-----
The parts of this video:
01:03 How to glue wood to reinforced concrete beams
03:09 Strength test of mounting adhesive
03:21 How to paint the wooden frieze
03:55 How to put a false ceiling with tongue and groove wood ceiling

https://enredandonogaraxe.club/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_Zpqp6CVlmIY

How to put False Ceiling made of wood frieze. Ceiling Easy to make

We make easy what you find difficult. Install the circular saw and riving knife or riving knife on the Master Cut 2600 to make a more secure table saw with the disc saw. In this video I don't exactly follow the method explained in the Wolfcraft manual of the master cut 2600, but I have some tricks that will still help you to make this task easier. The most basic thing that we must bear in mind is that we have to buy the opening wedge of the right size for the size of our circular saw and that we have two ways to put the disc saw according to its size. Don't forget to follow all the specifications in the manual. ❤️ In my blog I leave you more details of the master cut 2600 multitool work table and the opening wedges: https: //enredandonogaraxe.club / table-de-trabajo-multitool-mastercut-2600 😃 In the following links you can find in Amazon the products that I show in this video: Carpentry multitool table Master Cut 2600: https://geni.us/mastercut-2600 -1 -Amazon Longitudinal milling stop: https://geni.us/tope-de-mresado-1 -Amazon Separating knife 160mm: https://geni.us/cuchillodivisor160mm-1 -Amazon Separating knife 190mm: https: / /geni.us/divisorknife190mm-1 -Amazon Note: The spreader knives for the mastercut 2500 work for the mastercut 2600. As an Amazon Affiliate, I earn income from affiliated purchases that meet the applicable requirements. ----- In this video you can see: 00:00 Introduction 00:46 Details of the Wolfcraft manual 02:11 We begin to install the splitter wedge 04:27 Put the anchors of the disc saw 09:31 Remove and put the splitter wedge 09:42 Adjust splitter wedge on table saw

We make easy what you find difficult. Install the circular saw and riving knife or riving knife on the Master Cut 2600 to make a more secure table saw with the disc saw. In this video I don't exactly follow the method explained in the Wolfcraft manual of the master cut 2600, but I have some tricks that will still help you to make this task easier. The most basic thing that we must bear in mind is that we have to buy the opening wedge of the right size for the size of our circular saw and that we have two ways to put the disc saw according to its size.
Don't forget to follow all the specifications in the manual.

❤️ In my blog I leave you more details of the master cut 2600 multitool worktable and the opening wedges:
https://enredandonogaraxe.club/mesa-de-trabajo-multiherramienta-mastercut-2600

😃 In the following links you can find the products that I show in this video on Amazon:

Master Cut 2600 Woodworking Multitool Table:
https://geni.us/mastercut-2600-1 -Amazon

Longitudinal milling stop:
https://geni.us/tope-de-fresado-1 -Amazon

Separating knife 160mm:
https://geni.us/cuchillodivisor160mm-1 -Amazon

Separating knife 190mm:
https://geni.us/cuchillodivisor190mm-1 -Amazon

Note: The riving knives for the mastercut 2500 are suitable for the mastercut 2600.

As an Amazon Affiliate, I earn income from attached purchases that meet the applicable requirements.
-----
In this video you can see:
00:00 Introduction
00:46 Details from the Wolfcraft manual
02:11 We begin to install the opening wedge
04:27 Place the anchors of the disc saw
09:31 Remove and insert the opening wedge
09:42 Adjust the splitter wedge on the table saw

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_4HJHMOxC-io

🔥 How to put the circular saw and splitting wedge in master cut 2600

⚠️ Cut and paste IS NOT ENOUGH. BAD gluing the plywood will leave a horrible layering pattern. Plus I HAVE a trick to pressing the plywood boards with some makeshift wooden homemade clamps. Let's get into trouble. In this video I show a carpentry trick to ensure that when gluing phenolic plywood boards, when we want to make a thicker wooden board, the pattern of light and dark layers is perfect. And we are going to see a carpenter's trick in which I make some improvised sergeants with wooden wedges. Does this sound like using wooden wedges to press and glue boards :)? This time I am going to apply the pressure of the wooden wedges in a slightly different way, to put pressure on the entire surface of the wooden board that I want to glue. In the following links you can find on Amazon the multi-tool workbench that I use in this video and some related accessories: Mastercut 2600: https://geni.us/mastercut-2600-1 -Amazon Longitudinal milling stop: https://geni.us/tope-de-fresado-1 -Amazon Separating knife 160mm: https://geni.us/cuchillodivisor160mm-1 -Amazon Separating knife 190mm: https://geni.us/cuchillodivisor190mm-1 -Amazon Note: The riving knives for the mastercut 2500 are suitable for the mastercut 2600. As an Amazon Affiliate, I earn income from affiliated purchases that meet the applicable requirements. ------ Do you remember my long carpenter sergeants in which I use wooden wedges to press the boards ?: https://youtu.be/UjC8AG4dT18 ------ Here are the parts of this video: 00:00 cutting plywood with the straight cut guide 00:48 problem with circular saw 02:14 cutting wooden wedges with hand saw 03:03 drilling wooden slats 03:28 trick to get perfect plywood layering pattern 05:08 gluing phenolic plywood boards 06:21 Trick with slats and wedges to glue wooden boards 08:05 Trick to trim the edges with a table saw 08:55 problem cutting very thick plywood 09:45 result with perfect layer pattern https: //enredandonogaraxe.club/

⚠️ Cut and paste IS NOT ENOUGH. BAD gluing the plywood will leave a horrible layering pattern. Plus I HAVE a trick to pressing the plywood boards with some makeshift wooden homemade clamps.

Let's get into trouble. In this video I show a carpentry trick to ensure that when gluing phenolic plywood boards, when we want to make a thicker wooden board, the pattern of light and dark layers is perfect. And we are going to see a carpenter's trick in which I make some improvised sergeants with wooden wedges, does this sound like using wooden wedges to press and glue boards 🙂? This time I am going to apply the pressure of the wooden wedges in a slightly different way, to put pressure on the entire surface of the wooden board that I want to glue.

In the following links you can find on Amazon the multi-tool workbench that I use in this video and some related accessories:

Mastercut 2600:
https://geni.us/mastercut-2600-1 -Amazon

Longitudinal milling stop:
https://geni.us/tope-de-fresado-1 -Amazon

Separating knife 160mm:
https://geni.us/cuchillodivisor160mm-1 -Amazon

Separating knife 190mm:
https://geni.us/cuchillodivisor190mm-1 -Amazon

Note: The riving knives for the mastercut 2500 are suitable for the mastercut 2600.

As an Amazon Affiliate, I earn income from attached purchases that meet the applicable requirements.
------
Do you remember my long carpenter's sergeants in which I use wooden wedges to press the boards ?:
https://youtu.be/UjC8AG4dT18
------
Here are the parts of this video:

00:00 cutting plywood with the straight cut guide
00:48 problem with the circular saw
02:14 cutting wooden wedges with hand saw
03:03 drilling wooden slats
03:28 trick to get perfect plywood layer pattern
05:08 gluing phenolic plywood boards
06:21 Trick with slats and wedges to glue wooden boards
08:05 trick to trim the edges with a table saw
08:55 problem cutting very thick plywood
09:45 result with perfect layer pattern


https://enredandonogaraxe.club/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_FmsKON9ou1M

TAKE tricks to glue plywood boards. Perfect layered pattern.

The easiest way to have table saw, router table and table jigsaw, without complicating ourselves making homemade tables for our carpentry tools. Let's see how easy it is to change our woodworking machines on the Wolfcraft MASTERCUT 2600 to have a table saw with our hand circular saw, to have a fantastic router table made with the column router for wood, or to work with the Jigsaw set upside down as a table jigsaw. And this multi-tool table still has other functions such as a workbench or base for for example the miter saw, in addition to being a folding work table and easy to store and transport, but I wanted to focus on how easy it is to put and remove our saw blades. carpentry and DIY to make the cutting tables. It is not seen in the video, but the miter cutter guide allows cutting at 45º. I do not know if it is or not the best multitool table for DIY and carpentry, but I was pleasantly surprised and surely you will see it often in my videos. In the following links you can find the products that I show in this video on Amazon: Mastercut 2600: https://geni.us/mastercut-2600-1 -Amazon Longitudinal milling stop: https://geni.us/tope-de -Milling-1 -Amazon Separating knife 160mm: https://geni.us/cuchillodivisor160mm-1 -Amazon Separating knife 190mm: https://geni.us/cuchillodivisor190mm-1 -Amazon Note: The separating knives for the mastercut 2500 work for the mastercut 2600. As an Amazon Affiliate, I earn income from affiliated purchases that meet the applicable requirements. ----- In this video you can see: 00:00 Introduction 01:06 Level the tool plate. 01:52 Mastercut in table saw mode. 02:55 Safety switch 04:15 Miter guide. 05:33 How to swap machines in the mastercut. 06:50 Mastercut in milling table mode. 08:05 Lateral milling stop. 10:10 Mount inverted jigsaw on the mastercut as a table jigsaw. More details about the mastercut 2600 on the Wolfcraft website: https://bit.ly/3hgCgFq

The easiest way to have table saw, router table and table jigsaw, without complicating ourselves making homemade tables for our carpentry tools. Let's see how easy it is to change our woodworking machines on the Wolfcraft MASTERCUT 2600 to have a table saw with our hand circular saw, to have a fantastic router table made with the column router for wood, or to work with the Jigsaw set upside down as a table jigsaw. And this multi-tool table still has other functions such as a workbench or base for for example the miter saw, in addition to being a folding work table and easy to store and transport, but I wanted to focus on how easy it is to put and remove our saw blades. carpentry and DIY to make the cutting tables.
It is not seen in the video, but the miter guide allows cutting at 45º.
I do not know if it is or not the best multitool table for DIY and carpentry, but I was pleasantly surprised and surely you will see it often in my videos.

In the following links you can find the products that I show in this video on Amazon:

Mastercut 2600:
https://amzn.to/3y2Uzoh

Longitudinal milling stop:
https://amzn.to/2UT8Vtr

Separating knife 160mm:
https://amzn.to/3w5dtJK
Separating knife 190mm:
https://amzn.to/2T8IKhP
Note: The riving knives for the mastercut 2500 are suitable for the mastercut 2600.

As an Amazon Affiliate, I earn income from attached purchases that meet the applicable requirements.

In this video you can see:
00:00 Introduction
01:06 Level the tool plate.
01:52 Mastercut in table saw mode.
02:55 Safety switch
04:15 Miter guide.
05:33 How to swap machines in the mastercut.
06:50 Mastercut in milling table mode.
08:05 Lateral milling stop.
10:10 Mount inverted jigsaw on the mastercut as a table jigsaw.

More details about the mastercut 2600 on the Wolfcraft website:
https://bit.ly/3hgCgFq

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_-abwRGTBQss

The best table for circular saw, milling machine and jigsaw?

I needed to make a wooden bed for my drill lathe kit, otherwise I know I will never use the lathe. In this carpentry video we see how I was able to make the wooden board by gluing slats, some interesting tricks to cut with my jigsaw guides and also some interesting trick with the wood router and a straight cutter and the copy cutter with bearings. We can see how I use some of my joinery guides for jigsaw and router and how useful they are for cutting and working with wood. My portable guide with bearings so that the jigsaw blade does not bend when cutting wood: https://youtu.be/VuyVe_gTJjo The side guide to cut wood with the jigsaw straight and with great precision: https://youtu.be / qO7_l6PqiLQ The front tightening screw that we see in the video: Part 1: https://youtu.be/KuZY5wB4bxA Part 2: https://youtu.be/CW1_sXGaag0 Parts of the video: 00:12 How to make the wooden board 02:48 Guide for straight and precise cuts with the jigsaw 05:06 Lowering with the router 05:37 Using the copy cutter with the wood router 09:10 Trick with my portable guide with bearings of the jigsaw 11: 15 Installing the carpenter's lathe kit on the wood bench 12:36 Testing the wood lathe kit Here you can find Miguel Sanchez's channel related mainly to working with the wood lathe: https://www.youtube. com / channel / UCyOE_zdEBv4UcK5a_a3Z6hA https: //enredandonogaraxe.club / jigsaw https://www.instagram.com/enredandonogaraxe/ https://www.facebook.com/Enredandonogaraxe/

I needed to make a wooden bed for my drill lathe kit, otherwise I know I will never use the lathe. In this carpentry video we see how I was able to make the wooden board by gluing slats, some interesting tricks to cut with my jigsaw guides and also some interesting trick with the wood router and a straight cutter and the copy cutter with bearings. We can see how I use some of my joinery guides for jigsaw and router and how useful they are for cutting and working with wood.

My portable guide with bearings so that the jigsaw blade does not bend when cutting wood:
https://youtu.be/VuyVe_gTJjo

The side guide for cutting wood with the jigsaw straight and very precisely:
https://youtu.be/qO7_l6PqiLQ

The front tightening screw that we see in the video:
Part 1: https://youtu.be/KuZY5wB4bxA
Part 2: https://youtu.be/CW1_sXGaag0

Video parts:
00:12 How to make the wooden board
02:48 Guide for straight and precise cuts with the jigsaw
05:06 Lowering with the milling machine
05:37 Using the copy cutter with the wood router
09:10 Trick with my portable jigsaw bearing guide
11:15 Install the carpenter's lathe kit on the wooden bench
12:36 Testing the wood lathe kit

Here you can find the channel of Miguel Sanchez related mainly to the work with the wood lathe:
https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA

https://enredandonogaraxe.club/caladora

https://www.instagram.com/enredandonogaraxe/

https://www.facebook.com/Enredandonogaraxe/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_5L32s1eC4wg

🔥 Wooden bench for carpenter's lathe kit

Is getting over a million views still considered viral video today? It is not clear to me, but in this compilation I show 5 videos from my YouTube channel that I uploaded last year and that have more than a million visits (and some many more). In addition, I take the opportunity to remember other carpentry videos of 2020 that I also find interesting. Below you can see all the videos in this compilation: V Guide to keep the cutting blade of the jigsaw vertical: https://youtu.be/VuyVe_gTJjo Guide for vertical cuts at 45 degrees: https://youtu.be/ zMT_nII99B8 V Rare curved wood joint: https://youtu.be/JuAL9CBYzLs How to easily put cup hinges on melamine furniture: https://youtu.be/zwCpnpYiTiU V Long dovetail joint with the milling machine: https : //youtu.be/L9idSulapG0 V Curious trick to cut wooden circles with the jigsaw: https://youtu.be/yFueKzzCetE Double axis guide to cut circles with the jigsaw: https: // youtu.be/V-gECvrw3ZQ V Miter joint with butterfly reinforcement: https://youtu.be/o76_hqHpkfU How to cut a perfect bevel with the jigsaw: https://youtu.be/I8gDD08lVFg Wooden rods in the milling table: https://youtu.be/BQAzrbzVq74 Fish mouth joint and screw on wooden rods: https://youtu.be/Jk-r9bPmMws Incredible old machine Pedal marquetry ua: https://youtu.be/bI8Glz1W3eY Unboxing and tricks to assemble workbenches: https://youtu.be/79NoltzgSFA Unboxing laser machine: https://youtu.be/e2dp6OZS3Cg Incredible drill accessories : https://youtu.be/PZffeif4rZo My DIY and woodworking blog: https: //enredandonogaraxe.club/

Is getting over a million views still considered viral video today? It is not clear to me, but in this compilation I show 5 videos from my YouTube channel that I uploaded last year and that have more than a million visits (and some many more). In addition, I take the opportunity to remember other 2020 carpentry videos that I also find interesting.

Below you can see all the videos in this compilation:

V Guide to keep the jigsaw blade vertical:
https://youtu.be/VuyVe_gTJjo

Guide for vertical cuts at 45 degrees:
https://youtu.be/zMT_nII99B8

V Rare Curved Wood Union:
https://youtu.be/JuAL9CBYzLs

How to easily put cup hinges on melamine furniture:
https://youtu.be/zwCpnpYiTiU

V Long dovetail joint with the router:
https://youtu.be/L9idSulapG0

V Curious trick to cut wooden circles with the jigsaw:
https://youtu.be/yFueKzzCetE

Double axis turning guide for cutting circles with the jigsaw:
https://youtu.be/V-gECvrw3ZQ

V Miter joint with butterfly reinforcement:
https://youtu.be/o76_hqHpkfU

How to cut a perfect bevel with the jigsaw:
https://youtu.be/I8gDD08lVFg

Wooden rods on the milling table:
https://youtu.be/BQAzrbzVq74

Fish mouth joint and screw on wooden rods:
https://youtu.be/Jk-r9bPmMws

Amazing old pedal marquetry machine:
https://youtu.be/bI8Glz1W3eY

Unboxing and tricks to set up workbenches:
https://youtu.be/79NoltzgSFA

Unboxing laser machine:
https://youtu.be/e2dp6OZS3Cg

Amazing Drill Accessories:
https://youtu.be/PZffeif4rZo

My DIY and Woodworking Blog:
https://enredandonogaraxe.club/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_zeCd2bXf_DQ

5 viral videos + carpentry compilation 2020

Not every need needs a unique solution, but in this case I needed to make a clamping jaw for my workbench, to be used eventually as a carpenter's bench, which was easy to assemble and disassemble. And I wanted it to have some guides that hold the wooden clamp and that first allow it to be opened neither too much nor too little, and secondly, to put the pieces of wood to be cut both vertically and horizontally. And I wanted to prevent those guides from going too far under the workbench tabletop as they could trip over the drawers that open on the other side. A few conditions that do not allow me to use other systems that I had already done previously. In the end I decided on a simple invention with some small wooden stocks with some metal clasps. This wooden gag is inspired by another one I made a long time ago: https://youtu.be/ApdFtAwmAWM also with the help of some metal carpenter's sergeants. But in this case the work table does not have stringers but has drawers, so it was necessary to make changes to the design. The result I can say is quite satisfactory and will be very useful in my new home woodworking workshop. See also how to make a front vise that is tightened with a large metal vise: Part one, the vertical wood press: https://youtu.be/KuZY5wB4bxA Part two, the system to keep the press parallel and vertical: https://youtu.be/CW1_sXGaag0 See where I got my old woodworking tools: https://youtu.be/c7bE_Xt6QMg All my homemade sergeants and gags: https://youtube.com/playlist?list=PL5HnwgbHqm7HSH01vBws3XXOOYQ6DCn4G You can also find many other homemade woodworking tools on my channel and on my blog: https: //enredandonogaraxe.club/ https://www.instagram.com/enredandonogaraxe/ https://www.facebook.com/Enredandonogaraxe/

Not every need needs a unique solution, but in this case I needed to make a clamping jaw for my workbench, to eventually use it as a carpenter's bench, which was easy to assemble and disassemble. And I wanted it to have some guides that hold the wooden clamp and that allow first to open it neither too much nor too little, and secondly to put the pieces of wood to cut both vertically and horizontally. And I wanted to prevent those guides from going too far below the workbench tabletop as they could trip over the drawers that open on the other side. A few conditions that do not allow me to use other systems that I had already done previously. In the end I decided on a simple invention with some small wooden stocks with some metal clasps.

This wooden gag is inspired by another one I made a long time ago:
https://youtu.be/ApdFtAwmAWM
also with the help of some metal carpenter's sergeants. But in this case the work table does not have stringers but has drawers, so it was necessary to make changes to the design. The result I can say is quite satisfactory and will be very useful in my new home carpentry workshop.

See also how to make a front vise that is tightened with a large metal vise:
Part one, the vertical wood press:
https://youtu.be/KuZY5wB4bxA
Part two, the system to keep the press parallel and vertical:
https://youtu.be/CW1_sXGaag0

See where I got my old woodworking tools:
https://youtu.be/c7bE_Xt6QMg

All my homemade sergeants and gags:
https://youtube.com/playlist?list=PL5HnwgbHqm7HSH01vBws3XXOOYQ6DCn4G

You can also find many other homemade woodworking tools on my channel and on my blog:
https://enredandonogaraxe.club/

https://www.instagram.com/enredandonogaraxe/

https://www.facebook.com/Enredandonogaraxe/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_NzVigCUZqdQ

How to make a carpenter's bench clamp. Homemade bench vise

Buying tools at an antique market is always an adventure and a purchase that we tend to mistrust. But older tools are usually of good quality and brand names. Another thing is that they can be very rusty or clearly damaged, but if we make a good selection, discarding the damaged tools and choosing those that can still be used, we can find real jewels for our home carpentry workshops. In this case, I am going to test three old carpenter's tools that I bought very cheaply at the Villareal antique market (Vila-real, in Castellón). In particular, I have an incredible quick-tightening sergeant, a nice carpenter's square, and a rib saw (all carpenter's hand tools), which although they saw better times can say that they can still do their job with solvency. What's more, these new quality tools are sold today at quite high prices (compared to the price of cheap tools, which in many cases are of very poor quality). The only downside when making these purchases to save money on our tools, is that we have to have a good eye and know how to see which ones can still be used for our work with wood, and which, although they attract our attention, are only good. as a decoration or as a curiosity. In addition, in this video we see a couple of carpenter tips or tricks: 00:16 How to check the carpenter's square. Trick revealed. 01:29 Rapid tightening sergeant 02:27 How to cut a piece of wood with the hand saw See here how to do step by step some of my home carpenter sergeants: https://youtube.com/playlist?list=PL5HnwgbHqm7HSH01vBws3XXOOYQ6DCn4G My blog: https: //enredandonogaraxe.club/ My Instagram: https://www.instagram.com/enredandonogaraxe/ My Facebook: https://www.facebook.com/Enredandonogaraxe/

Buying tools at an antiques market is always an adventure and a purchase that we tend to mistrust. But older tools are usually of good quality and brand names. Another thing is that they can be very rusty or clearly damaged, but if we make a good selection, discarding the damaged tools and choosing those that can still be used, we can find real jewels for our home carpentry workshops. In this case, I am going to test three old carpenter's tools that I bought very cheaply at the Villareal antique market (Vila-real, in Castellón). Specifically, I have an incredible quick-tightening sergeant, a nice carpenter's square, and a rib saw (all carpenter's hand tools), which although they saw better times can say that they can still do their job with solvency. What's more, these new quality tools are sold today at quite high prices (compared to the price of cheap tools, which in many cases are of very poor quality).
The only downside when making these purchases to save money on our tools, is that we have to have a good eye and know how to see which ones can still be used for our work with wood, and which, although they attract our attention, are only good. as a decoration or as a curiosity.

In addition, in this video we see a couple of carpenter tips or tricks:

00:16 How to check the carpenter's square. Trick revealed.
01:29 Rapid tightening sergeant
02:27 How to cut a piece of wood with the hand saw

See here how to do step by step some of my home carpenter sergeants:
https://youtube.com/playlist?list=PL5HnwgbHqm7HSH01vBws3XXOOYQ6DCn4G

My blog:
https://enredandonogaraxe.club/

My Instagram:
https://www.instagram.com/enredandonogaraxe/

My Facebook:
https://www.facebook.com/Enredandonogaraxe/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_c7bE_Xt6QMg

I test three rusty antique flea market tools

Woodworking and DIY tool brands no longer sell these drill tools and accessories. Before you could connect these vintage tools to your drill and thus have a jigsaw, a drill lathe, an emery or even a very useful fret saw among many other carpentry accessories. 00:45 Circular saw for drill. 01:08 Table saw. 01:58 Jigsaw. 02:38 Drill-actuated marquetry saw. 04:05 Angle grinder. 04:46 Orbital sander. 05:51 Drill lathe kit. 06:40 Emery for lathe and drill. 08:33 Disc sander for lathe. 09:46 Column drill with the lathe. Also later we see in more detail these vintage woodworking and DIY tools. For now I can tell you that I was very surprised by how well the fret saw cuts. This tool is reconverted from the jig machine by holding it inverted to the workbench and cuts using a marquetry hair. Cuts Much Better Than My Table Jigsaw: https://youtube.com/playlist?list=PL5HnwgbHqm7Hy8IM-zFqbLtnsCrjenG18 The drill lathe kit was also surprising, since another that I showed you years ago does not work well at all, but with this I have a wood lathe that works very well and that allows easy and fairly accurate turning of wood. As for the circular saw and table saw, the blades that they bring are old and are not very reliable, since they are surely more prone than modern cutting wheels to cause kickback or kickback. But even so, the table saw surprised me, since it is very easy to assemble but quite stable, it has its separating blade behind the cutting disc and incorporates a curious system for regulating the cutting height. But most of all, something I miss on many modern table saw, this drill table saw has a miter guide that slides with a very decent fit in the groove that runs parallel to the cutting disc. And it is that in modern saws that guide slides too easily. Check out how I made my homemade woodworking tools: https://youtube.com/playlist?list=PL5HnwgbHqm7GFDV3bjq2m6b4RUOm30uqQ The drill jigsaw is surely the most popular tool of this style, and in this case it comes with a guide for cutting circles. My article on the jigsaw on my DIY and woodworking blog: https: //enredandonogaraxe.club / jigsaw And the grinding wheel for the lathe works perfectly and has the advantage that once disassembled it is an accessory that takes up very little space. My blog: https: //enredandonogaraxe.club/ My Instagram: https://www.instagram.com/enredandonogaraxe/ My Facebook: https://www.facebook.com/Enredandonogaraxe/

Woodworking and DIY tool brands no longer sell these drill tools and accessories. Before you could connect these vintage tools to your drill and thus have a jigsaw, a drill lathe, an emery or even a very useful fret saw among many other carpentry accessories.

00:45 Circular saw for drill.
01:08 Table saw.
01:58 Jigsaw.
02:38 Drill-actuated marquetry saw.
04:05 Angle grinder.
04:46 Orbital sander.
05:51 Drill lathe kit.
06:40 Emery for lathe and drill.
08:33 Disc sander for lathe.
09:46 Column drill with the lathe.

Also later we see in more detail these vintage woodworking and DIY tools. For now I can tell you that I was very surprised by how well the fret saw cuts. This tool is reconverted from the jig machine by holding it inverted to the workbench and cuts using a marquetry hair.

Cuts Much Better Than My Table Jigsaw:
https://youtube.com/playlist?list=PL5HnwgbHqm7Hy8IM-zFqbLtnsCrjenG18

The drill lathe kit was also surprising, since another that I showed you years ago does not work well at all, but with this I have a wood lathe that works very well and that allows easy and fairly accurate turning of wood.

As for the circular saw and the table saw, the blades that they bring are old and are not very reliable, since they are surely more likely than modern cutting wheels to cause kickback or kickback.

But even so, the table saw surprised me, since it is very easy to assemble but quite stable, it has its separating blade behind the cutting disc and incorporates a curious system for regulating the cutting height. But most of all, something I miss on many modern table saw, this drill table saw has a miter guide that slides with a very decent fit in the groove that runs parallel to the cutting disc. And it is that in modern saws that guide slides too easily.

Check out how I made my homemade woodworking tools:
https://youtube.com/playlist?list=PL5HnwgbHqm7GFDV3bjq2m6b4RUOm30uqQ

The drill jigsaw is surely the most popular tool of this style, and in this case it comes with a guide for cutting circles.

My article on the jigsaw on my DIY and woodworking blog:
https://enredandonogaraxe.club/caladora

And the grinding wheel for the lathe works perfectly and has the advantage that once disassembled it is an accessory that takes up very little space.

My blog:
https://enredandonogaraxe.club/

My Instagram:
https://www.instagram.com/enredandonogaraxe/

My Facebook:
https://www.facebook.com/Enredandonogaraxe/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_PZffeif4rZo

🌡️ 10 Woodworking Tools for Drill That Are No Longer Sold

Cutting and engraving wood, and engraving glass and other materials are techniques that will help give an incredible touch to our DIY and DIY projects or other more professional projects. In this video I do an unboxing of the Flux Beamo laser, as well as the rotary module for cylindrical pieces (for example to engrave glass glasses) and the Beam air filter, and we are going to see how easy it is to use this desktop laser technology to engrave our pieces of wood, glass and other materials. Come on, affordable technology to engrave wood at home or even for company projects or projects to sell. You can find this laser in: www.fluxlasers.es and there you can apply the discount code DIYFLUX1 that will be active until May 31, 2021. The technology of this compact tabletop equipment uses a 30W CO2 laser and can make engravings with great precision, since, in addition to working similar to a cnc machine, the laser that is focused on the piece to be engraved has 0,2mm of diameter (yes, it is finer than human hair) and engrave with a layer depth of 0,05mm. In addition, the machine is already prepared to work with various materials, and so for example we can directly select to cut 5mm wood, or engrave wood, or engrave glass, or cut 3mm wood or other cutting operations or engravings in various materials for which it is already configured. And yet we can also adjust the machine ourselves as needed. But one of the characteristics that I like the most about this laser is that it has an internal camera that allows us to take a photo of the object that we are going to engrave and / or cut, and thus in the computer with the mouse we can drag the way we are going to engrave or cut just to the position in which we want on top of the object. You can also follow my projects in: My blog: https: //enredandonogaraxe.club/ My Instagram: https://www.instagram.com/enredandonogaraxe/ My Facebook: https://www.facebook.com/Enredandonogaraxe/

Cutting and engraving wood, and engraving glass and other materials are techniques that will help give an incredible touch to our DIY and DIY projects or other more professional projects. In this video I unbox the Beamo de Flux laser, as well as the rotary module for cylindrical pieces (for example to engrave crystal glasses) and the Beam air filter, and we are going to see how easy it is to use this desktop laser technology to engrave our pieces of wood, glass and other materials. Come on, affordable technology for woodcutting at home or even for company projects or projects to sell.

You can find this laser in:
www.fluxlasers.es and there you can apply the discount code DIYFLUX1 that will be active until May 31, 2021.

The technology of this compact tabletop equipment uses a 30W CO2 laser and can make engravings with great precision, since, in addition to working similar to a cnc machine, the laser that is focused on the piece to be engraved has 0,2mm of diameter (yes, it is finer than human hair) and engrave with a layer depth of 0,05mm. In addition, the machine is already prepared to work with various materials, and so for example we can directly select to cut 5mm wood, or engrave wood, or engrave glass, or cut 3mm wood or other cutting operations or engravings in various materials for which it is already configured. And yet we can also adjust the machine ourselves as needed.

But one of the characteristics that I like the most about this laser is that it has an internal camera that allows us to take a photo of the object that we are going to engrave and / or cut, and thus in the computer with the mouse we can drag the way we are going to engrave or cut just to the position in which we want on top of the object.

You can also follow my projects in:

My blog:
https://enredandonogaraxe.club/

My Instagram:
https://www.instagram.com/enredandonogaraxe/

My Facebook:
https://www.facebook.com/Enredandonogaraxe/

YouTube Video UCo2f6PZeLKFZc28gUh0sEVw_e2dp6OZS3Cg

Unboxing 🔥 Flux Beamo laser and we tested this technology to cut and engrave wood

This error message is only visible to WordPress admins

Important: No API Key Entered.

Many features are not available without adding an API Key. Please go to the YouTube Feed settings page to add an API key after following these instructions.

Go up